|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TFS36A.doc Version 2.1 15.11.2000 VI TELEFILTER Filter Specification TFS 36 A 1/4 1. Measurement condition : 23 C 0 dBm. for input: for output: Ambient temperature TA: Input power level: Terminating impedances at fc: 50 0 pF. 50 0 pF. 2. Characteristics Remark: Reference level for the relative attenuation arel of the TFS 36A is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae . The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 40 dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed on 36 MHz without tolerance. The temperature coefficient of frequency Tcf is valid both for the reference frequency fc and the frequency response of the filter in the operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data Insertion loss (Reference level) Nominal frequency : ae typ. value 30,8 dB tolerance / limit max. 36 dB 36 MHz fN at temperature TOT = 45C 36,065 MHz 36,00 MHz Centre frequency fc at ambient temperature TA (fCAT) Centre frequency fc at temperature TOT = 45C Pass band ( PB ) : Amplitude ripple in PB (p-p) : Bandwidth 1 2 3 4 40 45 50 dB - band width dB - band width dB - band width dB - band width dB - band width dB - band width dB - band width fN fN fN fN fN fN fN fN arel 3,805 4,38 - 34 - 30 - 21 - 4,38 + 33 + 60 MHzMHzMHzMHzMHzMHzMHz MHz fN - 3,805 MHz ... fN + 3,805 MHz 0,7...0,9 dB 7,70 7,81 7,87 7,92 8,43 8,51 8,54 max. 1 dB at operating temperature: MHz min. 7,61 MHz MHz MHz MHz MHz max. 8,46 MHz MHz MHz max. 8,76 MHz max. min. min. min. min. min. min. min. max. 1 40 30 35 40 50 50 45 dB dB dB dB dB dB dB dB Relative attenuation fN ..... fN 4,23 MHz ... MHz ... fN - 35 MHz ... fN - 34 MHz ... fN - 30 MHz ... fN - 21 fN + 4,38 MHz ... MHz ... fN + 33 45...48 33...36 37 44...46 52...55 55 48...55 dB dB dB dB dB dB dB Group delay ( mean value in PB ): Group delay ripple in PB (p-p): Deviation from linear phase in PB (p-p): 4,64 s 90...130 ns 4,4..5,1 (r.m.s. 1,3...1,7) 5 s max. 5,5 p-p Triple transit attenuation compared to main signal 70 dB min. 55 dB Crosstalk 64..67 dB Temperature coefficient of frequency ( Tcf ) -87 ppm/K -94 ppm/K Frequency deviation of fc over temperature fc(Hz) = Tcf(ppm/K) x (T - TA) x fCAT (MHz) Operating temperature + 45 C Storage temperature range - 25 C ... + 85 C Generated: Dunzow W.P. Checked/Approved: Dr. Bert Wall VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. TFS36A.doc Version 2.1 15.11.2000 VI TELEFILTER Filter Specification TFS 36 A 2/4 3. Package : 35 Max Pin 3 Pin 2 Pin 15 Pin 14 Pin 1, 4-12, 13, 16-24 Input Input RF Return Output Output RF Return Ground 20,5 Max TFS 36 A tft M20 5,5 5,5 Datecode: K L M ....... 1 12 Year+week 1998 1999 2000 15,24 24 13 2,54 11x2,54 = 27,94 4. 50 matching networks ( about other matching networks see Application Note ): 50 123 10 11 12 Scheme 1. 50 24 23 22 15 14 13 VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. TFS36A.doc Version 2.1 15.11.2000 VI TELEFILTER Filter Specification TFS 36 A 3/4 5. Soldering temperature conditions : Soldering temperature profile Name: Temperature: Time: pre-heating periods main-heating periods 150 C - 170 C over 200 C 60 sec. - 90 sec. 20 sec. - 25 sec. peak temperature 255 C 5 C Soldering temperature profile 260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. Table for temperature vs. time during the soldering process Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 140 160 180 200 220 240 VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. TFS36A.doc Version 2.1 15.11.2000 VI TELEFILTER History Version Reason of Changes Filter Specification TFS 36 A 4/4 Name Wall B. Wall B. Wall B. Wall B. Dunzow W. Date 10.12.1999 21.12.1999 21.12.1999 10.12.1999 26.07.1999 1.0 Generate specification according to customer requirements. 1.1 1.2 1.3 1.4 Generate specification according to customer requirements. Generate specification according to customer requirements. Generate specification according to customer requirements. Edit Preliminary Specification. Edit typical values of the filter parameters after measured. Change stop band limit line in fN - 35 MHz ... fN - 30 MHz from min. 50 dB to min. 35 dB. Change stop band limit line in fN - 30 MHz ... fN - 21 MHz from min. 50 dB to min. 40 dB. Change limit of phase ripple in any 1 MHz in pass band from max. 4 to max. 5,5 in pass band. Edit Filter Specification. Change stop band limit line in fN - 35 MHz ... fN - 34 MHz from min. 35 dB to min. 30 dB. Change stop band limit line in fN + 33 MHz ... fN - 35 MHz from min. 50 dB to min. 45 dB. Change 40 dB bandwidth from min. 8.46 dB to max. 8.46 dB Change 50 dB bandwidth from min. 8.76 dB to max. 8.76 dB 2.0 Dunzow W. 10.11.2000 2.1 Dr. Wall 15.11.2000 VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. |
Price & Availability of TFS36A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |